Wanhua Clip-on Wall Panels
Calcium silicate wall panels that clip together on site
Calcium silicate wall panels, film-wrapped or painted in the factory, that clip together on site with matching joint and corner profiles. The finish arrives on the panel, so there is no plastering, setting or painting on site — and a single panel can be unclipped and replaced on its own.
How it goes together
Clipped, not glued
- 01 Fix the clip profile to the wall
- 02 Push the first panel onto the clip
- 03 Push in the next panel — it clicks into place and the joint closes
Drag to rotate · schematic, not to scale
The three joints, from the manual
-
Flat joint
Joins two panels in one plane, leaving a fine seam on the face.
-
External corner
Caps the panel ends where the wall turns outward.
-
Internal corner
Fills the inside corner where two walls meet.
Also in the system
Dry-hung tiles
The same wall system also takes tiles. They hang on rails fixed to the wall instead of being bedded in mortar or tile adhesive, so they go up dry like the panels — for feature walls and corridors in dry areas.
Tile sizes
- 300 × 600
- 400 × 800
- 600 × 1200
- 750 × 1500
- 900 × 1800
Sizes in mm. Colours, patterns and sizes made to order; fittings are matched to each site.
Properties
- Calcium silicate panels, film-wrapped or painted in the factory
- Clip together on site — a dry assembly
- No plastering, setting or painting on site: the finish is applied in the factory
- Profiles for flat joints, external corners and internal corners
- Unclip a single panel to replace or repair it
- Colours, patterns and sizes made to order
Applications: Homes, apartments, hotels, offices and commercial interiors.
Panel sizes
- Widths
- 600 / 800 / 900 / 1200 mm
- Heights
- 2400 / 2600 / 3000 mm
Profiles and fixings are matched to each site.